This surface-mountable luminaire is designed to sit in the bottom of a Ø3.5 metre high x 730mm wide hoop and uses specialised optics to provide an even wash of light on the inside of the hoop.
The custom powder-coated aluminium housing is fitted with 4x PCBs, 32x high power Osram LEDs - 8 each Red, Green, Blue and Mid White, “elliptical” output (13 x 81 ) secondary optics and clear lens. The “elliptical” optics give a very wide output in one axis (to illuminate the inner circumference of the hoop) and a very narrow output in the other axis (to illuminate the 730mm width of the hoop). It is very important that the LED fitting is orientated correctly in the bottom of the hoop. Terminated with a 3 metre, 5-core tail, via an IP-rated cable gland. Each luminaire is individually addressable to enable control for lighting sequences, dimming, etc.
Connect to njo “CB41” control boxes (part no. CB41-1000-48-2XD8025-500-OP10-HTR), fitted a 1000W, 48VDC PSU (preset at 33VDC and 35VDC) and 4-channel, Constant Current 500mA DMX interface cards, to allow full lighting control of the luminaires, 10 outputs and internal heater, thermostat and breather plugs.